Your GPU is pulling more power than your old PSU can handle, and you're not about to gamble on a half-dead unit. The Gigabyte UD1000GM PG5 2.0 puts a clean 1000W behind your build with 80 PLUS Gold efficiency (90% at typical load), so less heat, lower draw from the wall, and a unit that doesn't whine at idle.
It speaks PCIe Gen 5.0 and Intel ATX 3.0, so that 16-pin connector you've been eyeing is already on the board. Japanese main capacitors and a 120mm hydraulic bearing fan keep it quiet and running past 100,000 hours of MTBF. Fully modular means you only route the cables you actually use — no cable spaghetti in a compact 150 × 140 × 86 mm chassis.
Six protection layers (OVP/OPP/SCP/UVP/OCP/OTP) sit between your components and a brown-out. Flat black cables tuck clean behind the front panel. Single +12V rail keeps load distribution simple for high-draw cards.
Ships from our warehouse when stock lands. Call us if you're not sure it'll fit your case or match your GPU's draw — we'll sort it before you order
| atx_mb_20_4_pin | 1 × 610mm |
| cpu_eps_4_4_pin | 2 × (600mm + 200mm) |
| pci_e_16_pin | 1 × 700mm |
| pci_e_6_2_pin | 4 × (600mm + 150mm) × 2 |
| sata | 8 × (600mm+150mm+150mm+150mm × 2) |
| 4_pin_peripheral | 3 + 1 floppy × (500mm+120mm+120mm+150mm) |
| brand | GIGABYTE |
| model | GP-UD1000GM PG5 |
| wattage | 1000W |
| form_factor | ATX 12V v3.0 |
| efficiency_rating | 80 PLUS Gold (90% at typical load) |
| pfc | Active PFC (>0.9 typical) |
| input_voltage | 100–240 Vac full range |
| input_current | 15–6.5A |
| input_frequency | 50–60 Hz |
| dimensions_mm | 150 × 140 × 86 |
| fan | 120mm Hydraulic Bearing (HYB) |
| cable_type | Flat, all black, fully modular |
| single_12v_rail | 1 |
| pci_e_gen5_support | 1 |
| atx_3_0_compliant | 1 |
| mtbf_hours | >100,000 |
| protection | OVP / OPP / SCP / UVP / OCP / OTP |
| power_good_signal_ms | 100–150 |
| hold_up_time_ms | >16 |
| warranty_years | 10 |
| category | ELECTRONICS & COMPONENTS |
| subcategory | POWER & BATTERIES |
