Your cameras, access points, and desk phones all need power and data over the same cable. You don't want to run a second wire behind every workstation. The TL-SG1008MP handles that. Eight gigabit ports, all PoE+, 126W total budget with up to 30W per port. It's the direct replacement for the TL-SG1008PE, so if your old unit is on its last legs or you're specing a new install, this is the one that drops in without changing your cabling plan.
Plug it in. No config screen. No firmware update dance. Works with any 802.3af or 802.3at device. Sits flat on a desk or screws into a 19-inch rack. The energy-efficient mode trims idle power draw by up to 75%, so it's not quietly burning watts at 2am when the office is empty.
Ships with the power cord, rackmount kit, and rubber feet in the box
| 0 | FCC |
| 1 | CE |
| 2 | RoHS |
| 0 | TL-SG1008MP switch |
| 1 | Power cord |
| 2 | Installation guide |
| 3 | Rackmount kit |
| 4 | Rubber feet |
| brand | TP-Link |
| model | TL-SG1008MP |
| port_count | 8 |
| port_speed | 10/100/1000Mbps |
| poe_standard | IEEE 802.3af/at (PoE+) |
| poe_total_budget | 126W |
| poe_per_port | up to 30W |
| form_factor | Desktop / Rackmount |
| dimensions | 294 x 180 x 44 mm |
| backplane_bandwidth | 16Gbps |
| mac_address_table | 4K |
| buffer_size | 1.5Mbits |
| power_supply | 100-240VAC, 50/60Hz |
| max_power_consumption_no_pd | 9.89W (220V/50Hz) |
| max_power_consumption_full_pd | 140.67W (110V/60Hz, 126W PD) |
| fan_quantity | 1 |
| replacement_for | TL-SG1008PE |