ViewSonic PJ-WMK-304 Wall Mount Kit for Ultra-Short Throw Projectors | PX800HD, PS700X, PS700W, PS750W, PS750HD, LS810, LS830, LS831WU

You've got a gorgeous ultra-short throw projector and a wall that's 40mm off from where the image needs to land. A universal bracket won't solve that. This one will.

The PJ-WMK-304 was built specifically for ViewSonic's ultra-short throw range. No adapter plates, no 'will it fit' guessing. You bolt it on, nudge the tilt, roll, and yaw until the picture sits dead-centre, and you're done.

The arm slides from 365mm to 635mm, so you can tuck the projector close for a 100-inch image or pull it out a touch for a bigger throw. The steel plate (440 × 210mm) grips the wall properly, and the whole thing holds up to 25kg without a wobble. White finish means it disappears into an office wall or a classroom.

Hardware and the installation guide come in the box. Read the guide first — the screw pattern is specific to your model, and that saves you a trip back to the shop.

Fits: PX800HD, PS700X, PS700W, PS750W, PS750HD, LS810, LS830, LS831WU

• 3-axis alignment (tilt, roll, yaw ±5° each) for pixel-accurate image positioning
• Adjustable arm length: 365mm to 635mm to fine-tune throw distance in-room
• Heavy-duty steel construction rated to 25kg with a clean white finish
• Wall plate 440 × 210mm for a stable, secure anchor on plaster or concrete
• Purpose-fit for PX800HD, PS700X, PS700W, PS750W, PS750HD, LS810, LS830, LS831WU
• Mounting hardware and step-by-step installation guide included in the box