Fanvil PN1 2-Wire Converter – Reuse Existing Cables to Connect IP Devices

You've got an old building, a hotel corridor, or a community block where ripping out walls for new cabling is the last thing you want. But you need IP phones or devices on those existing 2-wire runs.

The Fanvil PN1 solves that in one step. Plug it into your current PSTN or RVV cable, connect your IP device, and you're live. No new wiring. No chasing walls. No master-slave pairing to figure out.

It handles up to 1600 m on network supply alone, or 300 m when you're pushing PoE power to the device. Works alongside Fanvil PN8 and PN24 switches for flexible networking across the site.

Gunmetal ABS body, RJ45 port, a reset button, and two status LEDs so you can confirm power and link at a glance. One unit per run. Two units if you need both ends. Sorted

• Reuses existing PSTN or RVV cabling – no new wiring, no wall chasing
• Connects any IP device over a 2-wire cable; plug in and go
• Compatible with Fanvil PN8 and PN24 switches for network and PoE power
• Up to 1600 m transmission (network supply) or 300 m with PoE to the device
• No master-slave pairing – two PN1 units work independently on either end
• Gunmetal ABS body, RJ45 port, reset button, and power/network status LEDs