Panel's sealed, wiring's dressed, and you need a connector that mates up to IP-67 without a gap for dust or moisture to sneak in. This CA Series panel plug screws into the faceplate and locks with the mating half to give you that IP-67 environmental seal. 3-pole plus pre-engaging earth, ≤5 mΩ contact resistance, Polyamide 6.6 housing rated -40 °C to +100 °C. Screw-clamp strain relief with a 9 mm gland nut holds the cable firm. Mates with Hirschmann C16-1 Series or similar connectors. Bolt it in, close the panel, carry on
| brand | Jaycar |
| sku | PP1008 |
| series | CA Series (Hirschmann C16-1 or similar) |
| pole_configuration | 3 Pole + PE (pre-engaging earth) |
| contact_resistance | ≤5 mΩ |
| ingress_protection | IP-67 (mating halves screwed together) |
| temperature_range | -40 °C to +100 °C |
| housing_material | Polyamide 6.6 |
| strain_relief | Screw clamp / Ring & Gland Nut (9 mm) |
| mounting_type | Panel mount (faceplate) |
| category | Electronics & Components > Cables & Connectors |
