Jaycar 2.1mm DC Plug with Screw Terminals – Hardwire Connector for Power Supply Wiring & Projects

You've got a transformer or power supply that needs a permanent 2.1mm DC output, but there's no pre-made cable to fit your setup. This Jaycar plug gives you screw terminals on the back so you can strip, seat, and tighten your own wires — no soldering iron, no heat-shrink mess. Twist the screws, push the 2.1mm barrel into your device, and you've got a solid, replaceable connection. If you need the socket half for the other end, that's PA3713

• Screw-terminal back — strip wire, seat, tighten. No soldering needed
• 2.1mm cylindrical DC barrel plug on the front for device connection
• Replaceable connector: swap the plug without re-wiring the whole run
• Fits standard 2.1mm DC jacks on routers, monitors, LED strips, and small appliances
• Matching socket half available as Jaycar PA3713