Rapidstick 8-145 Epoxy Putty Multi-Purpose 57g – 15-Minute Cure

Something's cracked. A bracket, a housing, a small structural piece that's holding on by hope and a dab of superglue. You need it fixed now, not after a two-hour cure window.

Rapidstick 8-145 is a kneadable two-part epoxy putty in a 57g tube. Part A (resin) sits outside, Part B (hardener) inside, separated by a thin plastic film. Peel the film off, knead until it's one colour, and you've got a high-bond-strength putty that cures to metal hardness in 15 minutes at room temperature.

Apply it by hand or trowel. Impact resistant. Permanent. No mixing cup, no ratio guessing — it's 1:1 and it's already measured for you.

Peel, knead, press, walk away. Fifteen minutes later it's harder than the thing you're fixing.

Add to cart and stop duct-taping the problem

• Two-part epoxy putty in a 57g tube — 1:1 ratio pre-measured, no mixing cup needed
• Cures to metal hardness in 15 minutes at room temperature (15–20 min range)
• Impact resistant with high bond strength for structural and repair applications
• Apply by hand or trowel — no special tools required
• Part A (resin, outer) and Part B (hardener, inner) separated by a thin plastic film for easy separation