You don't need a thread. You just need the right gap and a smooth hole to slide a 4.1mm bolt or pin straight through. These are untapped, six-point-four millimetres outer diameter, with a 4.1mm clearance bore. Nylon construction. Twenty-five in the pack. Slide them on, tighten from the other side, move on to the next job
| brand | JAYCAR |
| clearance_hole_mm | 4.1 |
| outer_diameter_mm | 6.4 |
| material | Nylon |
| pack_quantity | 25 |
| category | Electronics & Components > Tools & Soldering |
