2-Pin Straight Locking PCB Header – 2.54mm Pitch | Jaycar HM3412

You're mid-build, your board needs a two-pin header, and the national chain says 'back in three weeks.' This is the exact part. Solder the square tin-plated brass pins (3.4mm lead) straight into your PCB, plug your mating board or cable on at right angles or end-on, and you're moving again. The UL 94V-0 nylon wafer sits flush at 3.3mm thick, and the back gives you locking plus polarising so nothing wobbles loose or gets reversed. Buttable end-to-end if you need to extend the run. RRP $5.00. One part, one job, done

• 2-pin straight through-hole header, 2.54mm (0.1in) pitch
• Square tin-plated brass pins with 3.4mm solder lead for clean PCB joints
• UL 94V-0 white nylon housing, 3.3mm wafer thickness
• Locking and polarised back prevents misalignment and vibration pull-out
• Minimum contact force 200g; rated 0 to +75°C
• Buttable end-to-end for multi-way board-to-board or cable connections