Jaycar Sealed ABS Enclosure 171 x 121 x 80mm – Deep PCB & Component Housing with EPDM Seal

Your components are tall. Heatsinks, connectors, or a stacked PCB arrangement won't sit under a 55 mm lid without bending a pin. You need depth without losing the seal.

This Jaycar enclosure gives you 80 mm of internal height on a 171 x 121 mm base. Plenty of room for taller components, a small power supply, or a multi-layer board stack. The tongue-and-groove lid presses onto an EPDM gasket — no silicone, no tape, just a clean press that keeps dust and humidity out. Internal bosses let you bolt PCBs down horizontally or clamp terminals in place. M4 stainless steel screws thread into brass inserts; non-magnetic and rust-free.

Wall-mount holes and lid fasteners sit outside the sealed area, so fixing it to a panel doesn't break the gasket line. Rated -20 to 100 °C for hot server rooms or summer workshops.

Add to cart and it's on its way

• 80 mm internal height accommodates taller components, heatsinks, or stacked PCBs
• Tongue-and-groove lid with EPDM gasket seals out dust and moisture
• Internal bosses for horizontal PCB mounting or terminal connections
• M4 stainless steel lid screws into threaded brass inserts (non-magnetic)
• Wall-mount holes and fasteners sit outside the sealing perimeter
• Operating temperature range: -20 to 100 °C