Spectrol 1K Ohm 25-Turn Trimpot – Sealed, Vertical Adjust, 0.5W, In-Line Pins

You're mid-calibration and the pot's drifting under vibration. Or you've got a board layout that needs a trim value nobody sold in your last three trips to the shop. This Spectrol 1K trimpot is sealed against dust and moisture, so the setting you dial in stays there. Twenty-five turns of adjustment give you fine control across the full 1K range without hunting. Vertical adjust means it sits flush on a PCB or breadboard without eating vertical clearance. Pins run in a straight line at 2.5 mm spacing – standard through-hole, no fiddly offsets. Rated at 0.5 W. Grab it, set your circuit, move on

• 1K ohm resistance value for fine-tuning low-range circuits
• 25-turn adjustment for precise, repeatable setting without overshoot
• Sealed construction – dust and moisture won't shift your calibration
• Vertical adjust with in-line pins at 2.5 mm spacing for standard through-hole mounting
• 0.5 W power rating suits most signal-level and low-current applications