Your board spec says 100K linear, double gang, and the old pot's finally given out. You don't need to guess or substitute a different value and wonder why the response curve's off. This 9mm unit is the exact 100K linear pair, 50VAC rated, 300° sweep. Fit it, test both channels, and close the job
| brand | Jaycar |
| ohm_value | 100K |
| taper | Linear (B) |
| gang | Double |
| body_size_mm | 9 |
| rated_power_w | 0.05 |
| rated_voltage | 50VAC |
| slider_noise | <100mV |
| insulation_resistance | >100MΩ at 250VDC |
| dielectric_rating | 300VAC/minute |
| tracking_error | Within 3dB at 40~0dB |
| rotation_angle | 300° ± 5° |
| rotation_torque | 20–250 gf·cm |
| shaft_stop_strength | 5 kgf·cm/min |