SHARP SDM 12G SDI Interface Board – 4K60 BNC IN/OUT for Compatible Sharp Displays

Your Sharp display is doing the job, but the video source is pushing 4K at 60 fps and there's no 12G-SDI port to plug it into. You're stuck downscaling or running a signal loss you can see from across the room.

This SDM 12G SDI Interface Board adds one BNC SDI input and one BNC SDI loop output, handling up to 2160p at 60 Hz over 12G-SDI. Clean signal in, clean signal out.

One thing to nail down before you buy: it fits a specific list of Sharp display models only – MExx1, Mxx1 (43″–98″), Mxx1-2, PN-Mxx2 (43″–98″), MAxx1, Pxx5, and PN-Pxx6. If your model isn't on that list, it won't slot in. Check yours first or call us through and we'll confirm compatibility in two minutes.

Call us before you order

• 1 × BNC SDI input, 1 × BNC SDI loop output
• Supports up to 2160p at 60 Hz (12G-SDI)
• Compatible with MExx1, Mxx1 (43″–98″), Mxx1-2, PN-Mxx2 (43″–98″), MAxx1, Pxx5, and PN-Pxx6 displays only
• Slots into the Sharp display's interface bay – no external box or dongle