You've got a row of high-draw servers and you need to bypass the UPS without pulling a single cable. This panel takes hardwired mains in and gives you eight C19 outlets on the other side. That's it. No fiddling, no adapter stacks.
125A line rating. 20 kVA capacity. Circuit breaker built in. 99% efficiency so the power you pay for is the power your gear actually uses. Rack-mounts in 4U with brackets in the box.
Swap it into the rack, wire the input, plug your C19 cables in. UPS gets its service window. Your servers keep running. You go back to your actual job
| 0 | Installation guide |
| 1 | Rack mounting brackets |
| 2 | User manual |
| brand | APC |
| model | SBP20KRMI4U |
| rack_units | 4U |
| input_type | Hardwire 3-wire (1P+N+E) and 5-wire (3P+N+E) |
| output_type | 8× IEC 60320 C19 |
| outlets_c19 | 8 |
| max_line_current_a | 125 |
| load_capacity_va | 20000 |
| input_voltage | 220/230/240V single-phase; 380/400/415V three-phase |
| output_voltage | 230V (also 220V, 240V) |
| frequency_hz | 50/60 |
| efficiency_percent | 99 |
| protection | Circuit breaker |
| operating_temp_c | -20 to 50 |
| storage_temp_c | -40 to 65 |
| humidity_percent | 0–95 (non-condensing) |
| mounting | Rack mounted |
