Four high-draw servers. One UPS that needs a battery swap or a firmware update. You don't want to unplug anything. This 2U panel takes a hardwired feed and gives you four C19 outlets on the other side. Straight path. No adapters. No daisy-chained strips.
32A line rating, 7680 VA capacity. Circuit breaker built in. 99% efficiency. Rack-mounts in 2U — barely takes up space in a tight cabinet.
Wire the input, plug your C19 cables in, bypass the UPS, do your work. Four sockets, one clean power path, zero drama
| 0 | CSA |
| 1 | GOST |
| 0 | EN/IEC 62040-1:2019/A11:2021 |
| 1 | EN/IEC 62040-2:2006/AC:2006 |
| 2 | EN/IEC 62040-2:2018 |
| 0 | Installation guide |
| 1 | Rack mounting brackets |
| 2 | User manual |
| brand | APC |
| model | SBP6KRMI2U |
| rack_units | 2U |
| input_type | Hardwire 3-wire (1P+N+E) |
| output_type | 4× IEC 60320 C19 |
| outlets_c19 | 4 |
| max_line_current_a | 32 |
| load_capacity_va | 7680 |
| input_voltage | 230V |
| output_voltage | 230V |
| frequency_hz | 50/60 |
| efficiency_percent | 99 |
| protection | Circuit breaker |
| operating_temp_c | -20 to 50 |
| storage_temp_c | -40 to 65 |
| humidity_percent | 0–95 (non-condensing) |
| mounting | Rack mounted |
