Your IoT gateway or M2M device is sitting in a shed, on a rooftop, or bolted to the side of a van and the signal just isn't enough. This PANORAMA low-profile antenna fixes that without adding bulk. Two MIMO elements cover every current Australian cellular band from 698 MHz up to 3800 MHz. IP66 rated, so it shrugs off rain, dust, and a few years of outback sun. One hole in the panel, one adhesive seal, done. SMA plug on a 1 m RG174 cable means you unbox, screw it in, and you're transmitting. No drilling beyond that single bush, no external feeders, no fiddly adapters. If your terminal wants a clean MIMO signal and you need the install finished before the afternoon, this is the part
| brand | PANORAMA |
| category | ELECTRONICS & COMPONENTS |
| subcategory | AUTOMATION & SECURITY |
| pattern | Omnidirectional |
| max_input_power_w | 20 |
| frequency_range_mhz | 698-960 / 1710-3800 |
| gain_dbi | 4.5 (1710-2170MHz); 5 (2500-3800MHz) |
| cellular_lte_elements | 2 x 2 MIMO |
| wifi_elements | No |
| uhf_elements | No |
| cable_length_m | 1 |
| cable_type | RG174 |
| connector | SMA (m) |
| mounting_type | Mast; Panel; Wall |
| ip_rating | IP66 |
| technology | 2G/3G/4G/5G LTE |