You've got a PCB that's just slightly too big for the little box, and you don't want to start a new project because of a 5mm gap. This grey jiffy box fits a vertical PCB up to 63 × 39mm or horizontal up to 107 × 62mm. The underside of the lid has a 5mm grid of centre-punch points — you set your drill, tap, and go. No marking, no slipping, no 'is that hole in the right place?' moment. A 10mm scribed-line grid on the lid gives you a clean guide if you need to file or cut a pass-through for a connector. Base has its own punch-point grid so you can mount components from the inside without guessing. Fixing screws are in the bag. Pop it open, drop the board in, close the lid. Done
| brand | JAYCAR |
| colour | Grey |
| dimensions_mm | 130 x 68 x 44 |
| material | ABS plastic |
| pcb_fit_vertical_mm | 63 x 39 |
| pcb_fit_horizontal_mm | 107 x 62 |
| drill_grid | 5mm centre-punch points on lid, 10mm scribed lines |
| screws_included | 1 |
